A dependable solid-state power-control solution begins with the application. Identify the load, phase, operating voltage, current, control signal and working environment before selecting a product.
Start with what your equipment needs to do, then explore the relevant MGR series and the details needed for selection.
Ovens · electric heaters · process-temperature equipment
Switch heater power or adjust the output to match a temperature-control requirement.
Confirm the load voltage, number of phases, operating current and whether you need on/off switching or adjustable power.
Multiple loads · compact control panels · OEM equipment
Control several loads independently while grouping the outputs in one relay housing.
Specify the number of channels, AC or DC output, control signal and working current for each load.
Three-phase motors · forward / reverse operation
Select a dedicated reversing controller for changing the rotation direction of a three-phase AC motor.
Provide motor voltage, running current, starting current and reversing frequency to confirm the controller and cooling arrangement.
Equipment power supplies · DC auxiliaries · control cabinets
Build an AC-to-DC stage into an equipment power supply. The KBPC bridge works with the transformer, filter and any downstream regulation required by the equipment.
Confirm the AC input, required DC load current, cooling and any filtering requirements of the complete circuit.
Adjust heater power with an analogue command signal. The SCR regulator changes the conduction angle within each AC cycle.
Industrial ovens and process-heating equipment that need adjustable heater power.
Explore typical equipment uses here. Product detail pages contain the connection diagrams, operating principles, dimensions and electrical ratings.
A compact relay inside a 3D printer’s heating-control board. Pair the AC- or DC-output version with the heater used by the equipment.
AC control for an AC oven heater, or DC control for a DC heating element.
Compact heating controls and accessible fused relays for equipment power switching.
A fused relay in an oven cabinet; select DC–AC, AC–AC or DC–DC for the actual circuit.
View series ↗Send the available operating details. MGR can use them to narrow the suitable series and cooling arrangement.
Heater, motor, transformer or other load; switching, regulating, reversing or rectifying requirement.
Single or three phase, operating voltage, working current and inrush current.
DC, AC or analogue control signal, switching frequency and duty cycle.
Panel, DIN rail or PCB mounting, ambient temperature and available heat-sink space.